Hi, Joe

I and my gf did one video tutorial about " How to control site hierarchy and etc". So please check this link and tell us what you think. Better watch youtube HD version as it is closer to the original quality.

Unfortunately, English is not my native language so if you want you can send us a better audio recording and we will put it together.  If you like this video we can try to make more.  I also can send the video file to you to host it on your site (the size is about 4.5 megabytes).

Best regards.

Thanks,

    But voice has to be changed. I can send you a storyboard of this video and you can register your voice (or anybody with good pronouncement) and send me back.  Then I will try to normalize and remove noises from your recording.Does it work for you?

Would be better if you list in the credits my girlfriend as she did almost all routine as a designer . I wrote only storyboard and register the voice (and of course ask her to contribute to Mojoportal). Her name is Olga Kulahina (Olga Blue).

Best regards,

Vitaliy Akudovich

Ok,

  I will start to work on other videos, but actually it takes a lot of time to do a good one. So  I will upgrade my mojoportal to the latest version but this video tutorial I am not going to record again for the latest version of Mojoportal (Probably I will do it later). I can send you this video to post it on your channel. 

Would be nice to find some good English voice in order to make this video more professional (corporate guys like that).

A new one came out. Check it here.

And one more about mojoPortal skins

Hi Joe,
I use Camtasia Studio 6 (actually Camtasia recorder) to record the screen. And I use Wavepad to record the sound. Later on I sync sound and video in Camtasia Studio. And my microphone is a very cheap about 2$ (from Dollar Store) but somehow it is better than 80$ microphone from Logitec.
The whole process looks like that.
1. Write your scenario on the paper (the text to say + actions on the screen)

2. Record the sound with Wavepad
2.1 Normalize sound to 93-97% (not 100%)
2.2 Reduce the noise -30db
2.3 Listen your whole recording if some pieces to quite even after normalization -then amplify them.
2.4 Cut all unnessary sounds
2.5 Export as mp3 with 192 kb/s

3. Start camtasia recorder.
3.1 If you target Youtube rememer there is a vide size ratio is 16:9. So youtube HD format is 1280:720 (16:9). But I always record the screen with bigger size 1472:828 (ratio has to be 16:9 !!!).
3.2 While adding your freshly recording video (camrec file) to the Studio choose the size 1280:720 (Youtube HD size).

3.3 Sync sound and video (the biggest routine)
3.4 Add zooming efects. The 16:9 ratio is very important to follow especially while using zooming effects.
3.5 Add callouts (arrows and etc.)
3.6. Choose "Custom" (do not use Camtasia presets for youtube) production with next parameters:
video size - 1280:720
video type - mp4 (usually good quality and small size)
audio (check it) should be 192 kb/s (by default camtasia using the lowest)
also choose 24 framerate (by default 15), so some tranitions looks cheesy with 15 frames.
3.7 Finally export video.
4. Review the result as there are some bugs in Camtasia and you can expect some suprises (as black blinks).
4.1 If there are blinks then open your freshly produced mp4 and cut it out. Produce this projects.
5. Upload to youtube.

Best regards,

Vitaliy

Actually important thing to do in order to record the audio piece is setup your microphone level in your (OS). Level should not be high or low. Low it is about -30 -25 db (as result audio is too noisy). High -5db or 0db (as result you get clipping). The best situation if your voice level jumps between from -15db to -5db. And turn off any microphone boost in your OS.

Here is a new one.