<link>https://www.mojoportal.com/forums</link> <description /> <docs>http://www.rssboard.org/rss-specification</docs> <generator>mojoPortal Forum module</generator> <item> <title>Re: any bugs or malfunctions in new release Hey Massi,

The problem with the skins is likely due to you running an unreleased version. We have changed a few things with the Site Settings page that did cause issues with the unreleased 2.8.0.3 version. Your best bet is going to be to compare the theme.skin from the packaged framework skin with the skins you're running. Anything having to do with the Site Settings page should definitely match the new framework theme.skin.

We are aware of the 2.9 version not showing up properly. This was a packaging issue and we've resolved it in an upcoming release. I'll send this release to you directly so you can test it in your environment.

We're not able to reproduce the Google.protobuf issue. Do you have any "pro" modules installed? Only the mysql version uses Google.protobuf but it could have been packaged with the mssql version at some point in the past so you may have it. In that case, you should be able to just delete it.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15070~-1#post57557 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 29 Jun 2023 17:32:13 GMT Re: any bugs or malfunctions in new release also...

 

serious error in SiteSetting.aspx

 

tab link does not function but function in 2.8.0.3 version..... 

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15070~-1#post57555 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 26 Jun 2023 19:13:48 GMT
Re: any bugs or malfunctions in new release so,

as for the Google.protobuf assembly, I solved it by downloading the version from git hub and modifying the versioneg on the web.config. this highlights that there are errors on the web.config. which must be corrected before releasing.

then i noticed that NO skin works properly. while on an IDENTICAL site with identical skins everything works correctly. clear sign that it does not work ... there is something not working. I noticed that for example in the site management page only the first link (tab) works while the others don't. then everything is displayed on the same page. nothing works nothing works

I keep repeating that they are little things that are annoying and that shouldn't exist. and as I repeat, mine only wants to be constructive advice to ensure that mnojo is always the best as I myself have always considered him.

so...

  • fix versioning and web.config issues
  • fix errors on MSSQL scripts (dbo in [dbo])
  • fix versioning (2.8.0.7 and release 2.9)
  • fix skin problems

then.... make available... not before

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15070~-1#post57554 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 26 Jun 2023 17:59:32 GMT
any bugs or malfunctions in new release I've been trying the new version called 2.9.0.0 for a couple of days but I found something wrong.


I have been linked to mojoportal for many years and will remain so in the future but even if I offer some criticism I would like it to be taken as constructive.

 

  • the new version does not indicate 2.9.x.x but 2.8.0.7
  • skins that are fine on another domain do not work on the domain under test and have various errors. note that the server is the same. (win server 2019 sql server and dot net 4.6/4.8)
  • the most serious thing is that I had to comment on the wen.config the whole part relating to the ''google.protobuf'' assembly because otherwise it won't run returning an assembly loading error.
  • I noticed other serious problems on database scripts... in this case to include in several dbo scripts in brackets (dbo in [dbo]) because otherwise they give error during installation. I edited them by hand myself.

 

however I believe that when a new version is released, it MUST NOT give any problems. because doing so in my opinion, would be counterproductive.

as I repeat mine wants to be a suggestion to always be THE BEST.

I make myself available to do tests and trials.... I work on ARUBA in Italy

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15070~-1#post57552 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 22 Jun 2023 18:21:15 GMT
Re: Meta tags page settings does not work Hi Alexei,

We've fixed this issue and the fix will be in the next release, which should be this week. GitHub issue for reference

Thank you,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15065~-1#post57529 alexei.x https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 31 May 2023 18:17:53 GMT
Meta tags page settings does not work I tryed to add Meta Element, but i could not, because fields are not linked properly, so "Name Property" and "Name" are always same after add/edit operations. The same problem is with "Content Property" and "Content"

screenshot: https://imgbox.com/OyY1AzBM

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15065~-1#post57528 alexei.x https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 30 May 2023 13:21:45 GMT
Re: Newsletter model not shown Okay Joe..

you did well to respond publicly so it helps everyone who may need it

 

thank you very much

 

great Mojo

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57515 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 20 Mar 2023 18:01:43 GMT
Re: Newsletter model not shown Hi Massi,

We're responding to the email address you used when you sent in the request. You had responded to our earlier messages from the system as well.

Our last message to you was:

We looked into the issue yesterday and found that the data\emailtemplates folder is only read by the system when no templates exist in the database and should not be used to import templates. Please copy the HTML content of the file you are wanting to be a template and paste it in the source view of the WYSIWYG editor then save your template.

I'm posting it here because it benefits the community.

Thank you,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57514 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 20 Mar 2023 17:40:24 GMT
Re: Newsletter model not shown Hi Joe,

I have never received anything in my mail or even in spam, these are things I pay attention to.

 

make sure you wrote to the right address

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57513 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 19 Mar 2023 17:58:43 GMT
Re: Newsletter model not shown We have responded through our ticketing system. Please check your SPAM for messages from our support email address.

Thank you,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57512 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 19 Mar 2023 14:36:16 GMT
Re: Newsletter model not shown i have compiled the form ...    have news ?

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57511 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 16 Mar 2023 17:05:10 GMT
Re: Newsletter model not shown Hi Massi,

There's not a limit as far as I know but 80 templates seems like a lot.

Please complete this form to send us connection information for your site. You have been given access to this form for this thread only and access will be removed once we resolve this issue.

Thank you,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57509 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 14 Mar 2023 19:54:37 GMT
Newsletter model not shown i have two identical mojo sites...same version same server machine. one of which is almost empty because I use it for testing while the other is an active portal. on the test site I uploaded a template for a newsletter in the emailtemplates folder and I also uploaded it on the second site. on the site that I use as a test, I see the new one among the newsletter templates while on the other site I don't. the newsletter file is the same. I wonder why this behavior.

are there any limits? on the production site I saved about 80 newsletters as templates... is there a limit? why don't I see the new model loaded?

 

is it a bug?

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15055~-1#post57508 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 14 Mar 2023 17:43:37 GMT
Re: Viewing page crashes if Content Workflow involved a user who has subsequently been deleted Hi Crispin,

I've run into this before and found a work-around. I think setting the workflow dropdown from "Work in Progress" to "Live Content" on another page, then browsing to the page will allow you to see it and click the edit link on the content with a draft.

Another solution would be to replace the userguid on the draft content with an existing userguid. 

I will take a look at our source code to see if we've fixed this yet, and if not, I'll fix it.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15051~-1#post57504 CrispinF https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 27 Jan 2023 14:17:31 GMT
Viewing page crashes if Content Workflow involved a user who has subsequently been deleted Running mojoPortal 2.6.0.0 on MSSQL

ContentWorkflow references a user who has subsequently been deleted. A row in mp_ContentWorkflow has a userguid that dien't exist in mp_Users. The page cannot be loaded, with this in System Log:

2023-01-27 10:17:18,211 ERROR xx.xxx.xx.xxx - en-GB - /mypage - mojoPortal.Web.Global -  Referrer(https://mysite.com/Admin/ModulePermissions.aspx?pageid=734&mid=800&p=v) useragent Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/109.0.0.0 Safari/537.36 Edg/109.0.1518.69 
System.InvalidCastException: Object cannot be cast from DBNull to other types.
   at System.DBNull.System.IConvertible.ToInt32(IFormatProvider provider)
   at mojoPortal.Business.ContentWorkflow.PopulateFromReader(IDataReader reader)
   at mojoPortal.Business.ContentWorkflow.GetWorkInProgress(Guid moduleGuid)

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15051~-1#post57503 CrispinF https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 27 Jan 2023 10:41:19 GMT
Re: survey module bug Hello,

I'll need a lot more information in order to troubleshoot.

Please send me website urls and logins for the sites.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15042~-1#post57475 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 15 Aug 2022 23:01:28 GMT
survey module bug I have a serious problem with the investigation module on the latest mojo release.

I use the bootswatch-darkly skin on two sites both hosted on the same machine.

on one of the sites as soon as you press the link to view the results, they are regularly shown while on the other site (which is the important one and in production) they are not shown. I noticed that on the first one, the page address is very long while on the non-working one it seems that the address is missing a lot and the results are not shown.

I urgently need to fix the problem

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15042~-1#post57474 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 15 Aug 2022 17:14:24 GMT
Re: Google reCaptcha and .hospital domain Elijah, thank you for looking into this. Hard to say. Other child sites in the install work with reCAPTCHA, and this site works fine with any domain other than the .hospital extension. I have the domain in the google account set correctly. Like you say, maybe something with the Google response/parse.

I use Mojo daily, have near 100 sites. Still love this CMS more than any other. If there are more ways I can assist let me know!

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15013~-1#post57404 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 30 Mar 2022 14:13:19 GMT
Re: Google reCaptcha and .hospital domain Eric,

We've tested this issue in a brand new 2.7.0.0 install and can't seem to replicate it.

We're using reCAPTCHA v2 and set up "mydomain.hospital" as a local domain.

I've followed your error through the code behind, and from what I can tell something is going wrong on Google's end during the verification step and is returning a result that isn't expected.

Some of the code is old and maybe not the best way to parse the response from Google, so I'll go through and clean it up for the upcoming release.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15013~-1#post57403 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 29 Mar 2022 21:34:02 GMT
Google reCaptcha and .hospital domain MP v2.7, Windows Server, MS SQL

I've narrowed down a bug with Google ReCaptcha and the Admin login (could be other forms too). With a .hospital domain extension, I get the below error. If I switch to another domain it works fine.

 

2022-03-29 11:31:58,594 ERROR 65.30.52.71 - en-US - /Secure/Login.aspx?returnurl=%2fAdmin%2fAdminMenu.aspx - mojoPortal.Web.Global -  Referrer(https://www.mydomain.hospital/Secure/Login.aspx?returnurl=%2fAdmin%2fAdminMenu.aspx) useragent Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:98.0) Gecko/20100101 Firefox/98.0
System.ArgumentNullException: Value cannot be null.
Parameter name: errorMessage
   at mojoPortal.Web.UI.RecaptchaResponse..ctor(Boolean isValid, String errorMessage)
   at mojoPortal.Web.UI.RecaptchaValidator.Validate()
   at mojoPortal.Web.UI.RecaptchaControl.Validate()
   at System.Web.UI.Page.Validate()
   at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
2022-03-29 11:32:55,609 ERROR (null) - (null) - (null) - mojoPortal.Web.Global -  Referrer(https://www.mydomain.hospital/Secure/Login.aspx?returnurl=%2fAdmin%2fAdminMenu.aspx) useragent Mozilla/5.0 (Windows NT 10.0; Win64; x64; rv:98.0) Gecko/20100101 Firefox/98.0
System.ArgumentNullException: Value cannot be null.
Parameter name: errorMessage
   at mojoPortal.Web.UI.RecaptchaResponse..ctor(Boolean isValid, String errorMessage)
   at mojoPortal.Web.UI.RecaptchaValidator.Validate()
   at mojoPortal.Web.UI.RecaptchaControl.Validate()
   at System.Web.UI.Page.Validate()
   at System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument)
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
2022-03-29 11:35:32,579 INFO (null) - (null) - (null) - mojoPortal.Web.Global - Global.asax.cs Application_End
2022-03-29 11:35:36,641 INFO (null) - (null) - (null) - mojoPortal.Web.Global - Application Started.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=15013~-1#post57402 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 29 Mar 2022 17:19:28 GMT
Re: blogpostlist on folder name based multiple sites Thank you, it works!

Just one more question, if may I... I guess there is no possibility that the same razor template would be used for BlogPostList and for the Blog? So that blog posts in both would look the same?

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14960~-1#post57309 Matej Dular https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 18 May 2021 15:26:28 GMT
Re: blogpostlist on folder name based multiple sites Hello,

I've found the problem with this and have fixed it in our code. 

To work around the problem, use the following view as an example. Basically, you ned need to add @using mojoPortal.Web; to the top and then @SiteUtils.GetNavigationSiteRoot() in front of each instance of @item.ItemUrl and @Model.ModulePageUrl.

@using mojoPortal.Web.Helpers;
@using mojoPortal.Business;
@using mojoPortal.Web; @*add mojoPortal.Web to this line *@
@model PostListModel

<div class="blog-postlist">
    @foreach (var item in Model.Posts)
    {
        <article class="blog-postlist__item">

            <header>
                @if (!string.IsNullOrWhiteSpace(item.HeadlineImageUrl))
                {
                    <figure class="blog-postlist__item-featured-image">
                        <img src="@item.HeadlineImageUrl" alt="@item.Title" />
                    </figure>
                }

                <h2 class="blog-postlist__title">
                    <a class="blog-postlist__item-link" href='@SiteUtils.GetNavigationSiteRoot()@item.ItemUrl'>@item.Title</a> 
                </h2>
                @if (@item.SubTitle != "")
                {
                    <h3 class="blog-postlist__sub-title">@item.SubTitle</h3>
                }
            </header>

            <div class="blog-postlist__item-body">
                @Html.Raw(item.Body)
            </div>

            <footer>
                <div class="blog-postlist__metadata">
                    @if (item.ShowAuthorName)
                    {
                        <span class="blog-postlist__author">
                            @if (item.ShowAuthorAvatar && !item.ShowAuthorBio)
                            {
                                <span class="blog-postlist__author-avatar">
                                    @Html.Avatar(item.AuthorAvatar, item.AuthorEmail, item.AuthorUserId, new { Class = "author__avatar" }, new { Class = "author__avatar-link" }, true, true)
                                </span>
                            }
                            <span class="blog-postlist__author-name">
                                @if (!item.ShowAuthorAvatar || item.ShowAuthorBio)
                                {
                                    <i class="fa fa-user-circle"></i>
                                }
                                @item.AuthorDisplayName
                            </span>
                        </span>
                    }

                    <span class="blog-postlist__date"><i class="fa fa-clock-o"></i> @item.PostDate.ToString("MMMM dd, yyyy")</span>

                    @if (item.AllowCommentsForDays > -1)
                    {
                        <span class="blog-postlist__comments"><a class="blog-postlist__commentslink" href="@SiteUtils.GetNavigationSiteRoot()@item.ItemUrl#comments"><i class="fa fa-comments"></i> @Resources.BlogResources.BlogFeedbackLabel (@item.CommentCount)</a></span> 
                    }
                </div>

                @if (item.ShowAuthorBio)
                {
                    <div class="author__group author__group--blog-postlist media">
                        @if (item.ShowAuthorAvatar)
                        {
                            @Html.Avatar(item.AuthorAvatar, item.AuthorEmail, item.AuthorUserId, new { Class = "author__avatar media-object" }, new { Class = "author__avatar-link media-left" }, true, true)
                        }

                        @if (item.ShowAuthorBio && !string.IsNullOrWhiteSpace(item.AuthorBio))
                        {
                            <p class="author__bio media-body">@item.AuthorBio</p>
                        }
                    </div>
                }

            </footer>
        </article>
    }
    <p><a href="@SiteUtils.GetNavigationSiteRoot()@Model.ModulePageUrl">View all posts</a> &#187;</p> 
</div>
]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14960~-1#post57307 Matej Dular https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 17 May 2021 20:29:10 GMT
blogpostlist on folder name based multiple sites I am a bit surprised I can't find any reference to this situation... but it seems BlogPostList control has problems in name-based multi-tenancy mode. I have Blogs on a child sites (mapped to some folder named "yyy" or "xxx" or whatever), then I have a BlogPostList on child site that displays last posts of a blog control. But links in BlogPostList posts are wrong. They link to root site instead to the subfolder based child site.

I tried to solve the issue in razor template of the BlogPostList somwhow, but also got stuck. If you use "@Request.Url" in razor template, the default root page "root/default.aspx" is referenced, not the actual page in subfolder where the BlogPostList instance is running.

Can you please provide any help?

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14960~-1#post57306 Matej Dular https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 13 May 2021 10:22:45 GMT
home page link not work Hi .

I was doing some tests changing the skins from the control panel and I noticed a problem on almost all the skins. I seem to have already asked you in the past, but I don't remember well.

on all the available skins, I have installed them all, they are correctly loaded and mounted but however, if you press on HOME or on the title of the site, instead of returning to the home page an error is generated (ah, shucks). this happens on ALMOST ALL skins.

I might think this is an error due to the site running in a subfolder. but I don't know.

i noticed it only works on bootswatch-sandstone.

 

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14954~-1#post57300 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 19 Apr 2021 20:04:35 GMT
google maps malfunction in blog I noticed that for some time the maps entered in the posts are always shown standard even if the display is set in satellite mode

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14953~-1#post57299 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 19 Apr 2021 20:02:24 GMT
Re: Blog - Expired Posts option generates error Any workaround or ETA on a fix for this? I've had some clients have issues with this bug. The expired posts are helpful for people who pull up an old annual post and make it active again.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13903~-1#post57294 Neil Smith https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 09 Mar 2021 16:32:47 GMT
Re: HTML Slide functions Hi Ray,

It does work. If it's not working on one of your sites, there is likely a problem with your skin or the settings on the module.

Make sure you're following the guidance on this page: https://www.mojoportal.com/docs/html-module

Is there a url you can share with us?

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14940~-1#post57258 microquiz https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 21 Dec 2020 21:07:21 GMT
HTML Slide functions Hello,

Does anyone know why the HTML slide function don't work in ver 2700?

Many Thanks

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14940~-1#post57257 microquiz https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 16 Dec 2020 22:24:18 GMT
META Element does not work properly OS: Windows Server 2008

DB platform: SQLite

Version: 2.7.0.0

.NET Framework: 4.7, Integrated

 

After inserting a new article, the default values in Page Meta Data are set incorrectly - see below explicit HTML. Unable to update Meta Element, still returning to original bad value.

I'm not an ASP programmer, but I found a bug in the code mojo.Portal.Data.SQLite - mojoPortal.Data.DBContentMeta - Update:

string contentProerty.

 

On the same hosting where I have the MSSQLL DB Platform, everything is fine!

 

Explicit HTML:

<meta name="name" name="Roční příběh Barborky"  />

<meta description="description" description="Chrám sv. Barbory v Kutné Hoře Přejít na tento sway"  />

<meta image="image" image="https://foto.pechanec.cz/Data/Sites/1/media/barborka.jpg"  />

<meta og:type="og:type" og:type="article"  />

<meta og:site_name="og:site_name" og:site_name="Fotostránky Igorovo"  />

<meta og:title="og:title" og:title="Roční příběh Barborky"  />

<meta og:url="og:url" og:url="https://foto.pechanec.cz/pribeh-barborky"  />

<meta og:description="og:description" og:description="Chrám sv. Barbory v Kutné Hoře Přejít na tento sway"  />

<meta og:image="og:image" og:image="https://foto.pechanec.cz/Data/Sites/1/media/barborka.jpg"  />

<meta twitter:card="twitter:card" twitter:card="summary_large_image"  />

<meta twitter:title="twitter:title" twitter:title="Příběh Barborky"  />

<meta twitter:description="twitter:description" twitter:description="Chrám sv. Barbory v Kutné Hoře Přejít na tento sway"  />

<meta twitter:image="twitter:image" twitter:image="https://foto.pechanec.cz/Data/Sites/1/media/barborka.jpg"  />

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14937~-1#post57252 IgorPech https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 08 Nov 2020 17:31:17 GMT
Re: Blog - Expired Posts option generates error Thanks for the update Elijah - we appreciate the work you're doing on mojoPortal.

All the best

Neil

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13903~-1#post56371 Neil Smith https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 30 Jun 2020 09:50:05 GMT
Re: Blog - Expired Posts option generates error Hello,

This problem is fixed and has been for a while in the repository, sorry for not replying back when it was fixed.

It will be included in the upcoming release of mojoPortal.

Thanks,
Elijah

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13903~-1#post56362 Neil Smith https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 12 Jun 2020 16:24:20 GMT
Re: Form Wizard Pro: additional index Hi Jamie,

Thanks for this! We'll get it added to formwizard for sure.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14079~-1#post56356 Jamie E https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 08 Jun 2020 20:49:17 GMT
Re: SITES WITH SCOUT SKINS ARE VERY SLOW TO OPEN Hello,

This was fixed, for me, by:

goto web.config

search for Minify and sweitch to "false"

Scout skin loads like a dream.

Ray

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14033~-1#post56344 Roberto Castellano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 30 Apr 2020 19:51:45 GMT
Form Wizard Pro: additional index Hi, guys. I wanted to report a performance issue. As you know we've been running our site with Form Wizard Pro for almost ten years now. Our sts_webformresponse table is up to 77 MB in size. We'd noticed that performance in saving form responses had gotten very bad, so I took a look and found this statement in particular running slowly:

SELECT  wfr.*, rs.UserGuid, rs.CreatedUtc
FROM    sts_WebFormResponse wfr
JOIN sts_WebFormQuestion wfq ON wfr.QuestionGuid = wfq.Guid
JOIN sts_WebFormResponseSet rs ON rs.Guid = wfr.ResponseSetGuid
WHERE wfr.ResponseSetGuid = 'xxx'
ORDER BY wfq.SortOrder;

I was able to speed this statement from as slow as 14 seconds in our environment down to .01 seconds by adding an index on sts_webformresponse.ResponseSetGuid

Judging by the MySQL slow queries log, I think there may be some other areas of the database where performance can be improved. Would you prefer me to report them here or on Github?

Thanks,
Jamie

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14079~-1#post56340 Jamie E https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 14 Apr 2020 23:28:41 GMT
Site MemberShip Pro Add-on with MySQL Data Layer problem Hi,

I'm not sure if this is the correct forum for this problem. I've just downloaded latest version of "Site Membership Pro" add-on from my "Order History" page. File name is sitemembership-1100.zip

But the dll file in mysql folder is wrong. It's for mssql. Can you please fix it? Previously this library (only MySQL Data Layer) was under GPL terms and the source code was publicly available. Now, I can't find it on github.

Thanks.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14077~-1#post56338 Osman https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 29 Mar 2020 03:17:13 GMT
error deleting forum thread Hi, I'm on version  2.7.0.0 MSSQL

If I try to edit a forum thread I get an error "A potentially dangerous Request.Path value was detected from the client" - it's impossible to delete the thread without hacking the database.

The edit URL looks like this, so I can imagine the browser might see it as a threat - 

http://(mydomain)/Forums/Controls/%3C%25=%20$%22%7BSiteRoot%7D/Forums/EditThread.aspx?thread={DataBinder.Eval(Container.DataItem,%22ThreadID%22)}&mid={ModuleId}&pageid={PageId.ToString()}%22%20%%3E

Here's the log entry:

2020-03-28 21:16:29,717 ERROR 212.159.117.250 - (null) - (null) - mojoPortal.Web.Global - 212.159.117.250 /Forums/Controls/<%= $"{SiteRoot}/Forums/EditThread.aspx?thread={DataBinder.Eval(Container.DataItem,%22ThreadID%22)}&mid={ModuleId}&pageid={PageId.ToString()}%22%20%%3E Referrer(http://www.maswell.org.uk/Forums/ForumView.aspx?pageid=236&f=46~1) useragent Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/80.0.3987.149 Safari/537.36 
System.Web.HttpException (0x80004005): A potentially dangerous Request.Path value was detected from the client (<).
   at System.Web.HttpRequest.ValidateInputIfRequiredByConfig()
   at System.Web.HttpApplication.PipelineStepManager.ValidateHelper(HttpContext context)

 

I originally got the error with Chrome but also get it with Edge

Have you come across this - is there a workaround?

Thanks

Ian

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14076~-1#post56337 Ian Rogerson https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sat, 28 Mar 2020 21:42:02 GMT
"Require SSL on all pages" not working in Event Calendar Pro I have a site with this switched on, however it is still possible to browse to calendar entry pages over http. 

See https://www.mynydd-du.org.uk/calendar

You cannot browse to http://www.mynydd-du.org.uk/calendar

but you can browse to 

http://www.mynydd-du.org.uk/grim-reaper-mynydd-llangors-race-2020-01-12

For all other pages this setting causes the site to redirect onto https automatically, so presumably it should for the Calendar?  Or am I missing a setting somewhere?

Thanks

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14057~-1#post56271 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 02 Jan 2020 19:22:29 GMT
Re: Key not present in dictionary Hi,

That version of mojoPortal is almost 10 years old and the MySql version you're running is less than 2 months old. I think you need to upgrade mojoPortal so your site will work with this new version of MySql.

Thank you,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14046~-1#post56252 b https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 19 Nov 2019 20:39:32 GMT
Re: Key not present in dictionary MojoPortal version 2.3.3.6 as seen in the schemaversion table --SELECT * FROM `mp_schemaversion`

InnoDBVersion 5.7.28 as seen by running : SHOW VARIABLES LIKE "%version%"

collation on the tables is: utf_general_ci, then ran this sql:

SELECT * FROM performance_schema.session_variables WHERE VARIABLE_NAME IN ( 'character_set_client', 'character_set_connection', 'character_set_results', 'collation_connection' ) ORDER BY VARIABLE_NAME;

and got this result table:

VARIABLE_NAME                VARIABLE_VALUE

character_set_client            utf8mb4

character_set_connection   utf8mb4

character_set_results          utf8mb4

collation_connection           utf8mb4_unicode_ci

and these others showed up when running: SHOW SESSION VARIABLES LIKE 'character\_set\_%'

character_set_filesystem    binary

character_set_database     utf8mb4

character_set_server         utf8mb4

character_set_system        utf8

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14046~-1#post56250 b https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 19 Nov 2019 00:23:04 GMT
Re: Key not present in dictionary Hi,

The error is coming from the mysql data client (MySql.Data.MySqlClient.CharSetMap.GetChararcterSet). A quick search for "mysqlclient.charsetmap key was not present" turned up a few results suggesting that the data client in the application (mojo) is too old for the version of mysql you're connecting to or that the character set specified on the database isn't supported by the data client in the application (mojo).

So, a couple of questions:

  1. What version of mojoPortal are you running?
    If you haven't upgraded in a long time but are running a new version of MySql, you need to upgrade mojoPortal.
  2. What version of MySql are you running?
    If you have upgraded this recently, and you haven't upgraded mojoPortal in a while, you need to upgrade mojoPortal.
  3. What is the character set specified on the mojoportal database?

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14046~-1#post56249 b https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 18 Nov 2019 22:29:46 GMT
Key not present in dictionary MojoPortal has been working wonderfully for me for years.  Thank-you.

Today, however, I am perplexed by the error message below when attempting to just visit my site - www.kbearle.com.  I checked to be sure that the db exists and is still working, the connection string is up to date and no other changes have been made since the last time I visited the site a few weeks ago.  What key is not present?  TKey key seems to be the reference, but no search in the forums came up with such a reference.  

Thanks in advance for providing some pointers on where to look to resolve this issue that is keeping my site from loading.

Brad

 

[KeyNotFoundException: The given key was not present in the dictionary.] System.ThrowHelper.ThrowKeyNotFoundException() +36 System.Collections.Generic.Dictionary`2.get_Item(TKey key) +10402245 MySql.Data.MySqlClient.CharSetMap.GetChararcterSet(DBVersion version, String CharSetName) +58 MySql.Data.MySqlClient.NativeDriver.GetFieldMetaData41() +724 MySql.Data.MySqlClient.NativeDriver.GetFieldMetaData() +72 MySql.Data.MySqlClient.NativeDriver.ReadColumnMetadata(Int32 count) +48 MySql.Data.MySqlClient.MySqlDataReader.NextResult() +383 MySql.Data.MySqlClient.MySqlCommand.ExecuteReader(CommandBehavior behavior) +1204 MySql.Data.MySqlClient.MySqlCommand.ExecuteScalar() +41 MySql.Data.MySqlClient.MySqlHelper.ExecuteScalar(MySqlConnection connection, String commandText, MySqlParameter[] commandParameters) +170 MySql.Data.MySqlClient.MySqlHelper.ExecuteScalar(String connectionString, String commandText, MySqlParameter[] commandParameters) +98 mojoPortal.Data.DBBannedIP.IsBanned(String ipAddress) +312 mojoPortal.Business.BannedIPAddress.IsBanned(String ipAddress) +48 mojoPortal.Web.BannedIPBlockingHttpModule.BeginRequest(Object sender, EventArgs e) +678 System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +80 System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +171

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14046~-1#post56248 b https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 18 Nov 2019 19:52:56 GMT
Re: Empty role descriptions Hi Eric,

If you pull and build from newer code in the repo, this problem was fixed in January. (https://github.com/i7MEDIA/mojoportal/commit/1db87e4c45cc2ede1b5657bc8808da24774f2fbb#diff-d89b30b59831eb3895a4014c2c8bff24)

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14042~-1#post56242 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 31 Oct 2019 21:21:22 GMT
Re: Empty role descriptions Hey Eric,

Actually, looking closer with this, the DisplayName column has been on that table for a long time. All we did in 2.7.0.2 is allow setting the display name on creation of a role and changing display name on updating a role. The way it used to work was it just used the same value for DisplayName and RoleName. So, the column has been there for as long as I can remember and the only db changes we made to use the column was to actually pull it back and not just pull the RoleName back for the DisplayName column (why that was done in the first place, I don't know).

You're only seeing this problem when adding child sites, right? You haven't had it on new root sites all, correct?

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14042~-1#post56241 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 31 Oct 2019 21:02:35 GMT
Re: Empty role descriptions Hi Eric,

Thanks for the report. We'll get that fixed right away.

-Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14042~-1#post56240 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 31 Oct 2019 15:00:57 GMT
Empty role descriptions In version 2.7.0.2 MSSQL when I create a new child site the database table "mp_Roles" creates empty an empty "DisplayName" field for each of the roles that are auto-created. I always have to go into the database and manually copy in the names so they show up in the drop-dowm menu when editing user roles.This happens for me on multiple installs and started last version I think it was.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14042~-1#post56236 Eric Stoffers https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 21 Oct 2019 15:22:30 GMT
Re: Blog attachments don't work! Thanks Joe,

You are right.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14039~-1#post56231 Sadegh Samarian https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 04 Oct 2019 04:58:38 GMT
Re: Blog attachments don't work! Hi Sadegh,

The attachments feature is working on the demo site. The problem you are having is probably that you are trying to upload a file that is not a video or audio file. This feature is meant for audio and video files only and uses a media player to "show" the files. There is an error message that lists the file types that are allowed after you try to upload a file that isn't allowed but that error message goes away when the page refreshes.

While the feature is working as originally intended, I think it needs to be updated to either allow other file types or show better error messages and prompts so people know what the feature is supposed to do.

I'll get to work on fixing that.

Thank you,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14039~-1#post56228 Sadegh Samarian https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 01 Oct 2019 19:32:21 GMT
Blog attachments don't work! Hi,

When I add attache a file to blog post, after i select file and click upload button, progress bar go to end and tab changed to "content" tab. Attachments don't show in "attachments" tab.

After this, when i click on save button don't save and stay in blog edit page.
I check this in demo site, problem is exist here.

thanks
 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14039~-1#post56227 Sadegh Samarian https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 25 Sep 2019 16:32:32 GMT
Re: SITES WITH SCOUT SKINS ARE VERY SLOW TO OPEN Hello Roberto,

What's going on here isn't caching, although it would seem it is.

The skin has a control called a SuperWrapper which creates content in the DB the first time the site is loaded with the skin. The content that is created is in the footer of the site, all of those "custom menu X" and "Follow Us" sections. It was a first attempt at creating skins with pre-defined content that would be on all pages of the site. We're working on some new methods for this so this first load doesn't take so long and the SuperWrapper isn't necessary.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14033~-1#post56222 Roberto Castellano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 11 Sep 2019 19:59:52 GMT
SITES WITH SCOUT SKINS ARE VERY SLOW TO OPEN MP 2.7.0.0 MSQL 

SCOUT SKIN

the load of sites with Scout skins is very slow (1-2 minutes) before the caching. Changing the skin the loading appears faster (1-5 seconds).  What is the problem and how can be minimized?

best regards

Roberto

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14033~-1#post56217 Roberto Castellano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 09 Sep 2019 17:22:25 GMT
TinyMCE i have last relese 2.7.0.0 but TinyMCE (419) does not appear in editor...  will view none in page..   CKeditor run correctly..  why ?

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14001~-1#post56145 massimiliano https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 17 Apr 2019 20:07:42 GMT
Re: Rebuild Search Index - log4net issue Hi Rob,

It used to come with mojoPortal, so it was installed by default. We felt like it was not nearly to the point of a proper webstore so we removed it from the releases. 

So, to remove it from your installations, do the following:

  • Go to Administration > Advanced Tools > Feature Installation/Configuration
  • Click the settings gear next to WebStore
  • Click the delete button.
  • Go to the file system for the installation and delete the following folders/files
    • <install directory>/WebStore
    • <install directory>/bin/WebStore.Business.dll
    • <install directory>/bin/WebStore.Data.dll
    • <install directory>/bin/WebStore.UI.dll
    • <install directory>/setup/application/webstore
    • <install directory>/setup/ProviderConfig/worldpayresponsehandlers/webstoreworldpayresponsehandler
    • <install directory>/setup/ProviderConfig/sitepredeletehandlers/009_webstoredeleter.config
    • <install directory>/setup/ProviderConfig/paypalreturnhandlers/webstorepaypalhandler.config
    • <install directory>/setup/ProviderConfig/paypalpdthandlers/webstorepaypalpdthandler.config
    • <install directory>/setup/ProviderConfig\paypalipnhandlers/webstorepaypalipnhandler.config
    • <install directory>/setup/ProviderConfig/indexbuilders/webstoreproductindexbuilder.config
    • <install directory>/setup/ProviderConfig/indexbuilders/webstoreofferindexbuilder.config
    • <install directory>/setup/ProviderConfig/gcheckoutnotificationhandlers/webstoregcheckout.config
    • <install directory>/setup/ProviderConfig/contentdeletehandlers/webstoredeletehandler.config

For those items in the <install directory>/setup/ProviderConfig folders, you could just do a search on the ProviderConfig folder itself for webstore and delete any items found.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14000~-1#post56144 Rob A https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 03 Apr 2019 21:31:36 GMT
Re: Rebuild Search Index - log4net issue Thanks Joe.  I never installed the Web Store.  How do I remove it from my sites?

Rob

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14000~-1#post56143 Rob A https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 03 Apr 2019 19:51:10 GMT
Re: Rebuild Search Index - log4net issue Hi Rob,

That work around should work fine. To fix the issue, upgrade the version of WebStore you have on your site. We made the WebStore a separate project, with separate download, when we released mojoPortal 2.6. 

Thanks,
Joe D.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14000~-1#post56142 Rob A https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 03 Apr 2019 19:48:44 GMT
Re: Rebuild Search Index - log4net issue Found a work around.  Had to put a copy of the old version of log4net.dll in a subfolder of bin and then add the following to the web.config:

    <dependentAssembly>
        <assemblyIdentity name="log4net" publicKeyToken="1b44e1d426115821" />
        <codeBase version="1.2.11.0" href="bin\log4net.1.2.11\log4net.dll" />
    </dependentAssembly>

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14000~-1#post56141 Rob A https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 03 Apr 2019 17:02:47 GMT
Rebuild Search Index - log4net issue I'm running 2 different mojoPortal sites, one is 2.6.0.0 and one is 2.7.0.0.  On both, when I try to rebuild the search index it fails and gives several errors in the Windows event log.  I've tried various configurations of mapping log4net.dll versions within the web.config and cannot get it to work.  Here are the Windows messages:

An unhandled exception occurred and the process was terminated.

Application ID: /LM/W3SVC/2/ROOT

Process ID: 5200

Exception: System.IO.FileLoadException

Message: Could not load file or assembly 'log4net, Version=1.2.11.0, Culture=neutral, PublicKeyToken=1b44e1d426115821' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)

StackTrace:    at WebStore.UI.Helpers.OfferSearchIndexBuilder.RebuildIndex(PageSettings pageSettings, String indexPath)
   at mojoPortal.SearchIndex.IndexHelper.RebuildSiteIndex(String indexPath, IEnumerable`1 menuPages)
   at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
   at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
   at System.Threading.ThreadPoolWorkQueue.Dispatch()

--------------------------

Exception information: 
    Exception type: HttpException 
    Exception message: Could not load file or assembly 'log4net, Version=1.2.13.0, Culture=neutral, PublicKeyToken=669e0ddf0bb1aa2a' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
   at System.Web.HttpApplicationFactory.EnsureAppStartCalledForIntegratedMode(HttpContext context, HttpApplication app)
   at System.Web.HttpApplication.RegisterEventSubscriptionsWithIIS(IntPtr appContext, HttpContext context, MethodInfo[] handlers)
   at System.Web.HttpApplication.InitSpecial(HttpApplicationState state, MethodInfo[] handlers, IntPtr appContext, HttpContext context)
   at System.Web.HttpApplicationFactory.GetSpecialApplicationInstance(IntPtr appContext, HttpContext context)
   at System.Web.Hosting.PipelineRuntime.InitializeApplication(IntPtr appContext)

Could not load file or assembly 'log4net, Version=1.2.13.0, Culture=neutral, PublicKeyToken=669e0ddf0bb1aa2a' or one of its dependencies. The located assembly's manifest definition does not match the assembly reference. (Exception from HRESULT: 0x80131040)
   at mojoPortal.Web.Global.Application_Start(Object sender, EventArgs e)

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=14000~-1#post56140 Rob A https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 03 Apr 2019 14:38:24 GMT
Re: ckeditor toolbar not rendering correctly in android chrome Hi,

You can add the following to your user.config and then "touch" the web.config. This will be the default in the next release.

<add key="AdaptEditorForMobile" value="false" />

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13997~-1#post56137 rraghunath https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 27 Mar 2019 17:01:55 GMT
Re: ckeditor toolbar not rendering correctly in android chrome Hello,

I wanted to clarify the prior post.  After logging to the demo site,  go to http://demo.mojoportal.com/Admin/EditLoginInfo.aspx.   On an android phone,  instead of seeing the tool bar in the text edit region,  there's a list of links with names like Heading 1, Heading 2, Paragraph, Bold.

 

Thanks

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13997~-1#post56135 rraghunath https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 25 Mar 2019 18:46:53 GMT
ckeditor toolbar not rendering correctly in android chrome Hello,

I'm seeing an issue when viewing mojo portal demo on an android phone, using chrome for android.  Initially saw issue on the mojo portal installation that I work on.  When editing a page,  the toolbar in the text area is not rendering correctly.

to duplicate:  1.open chrome on an android device, 

                      2. navigate to demo, 

                      3.login using admin login. 

                      4.edit the page

                      5. Instead of seeing the toolbar in the text edit area,  there is bulleted list of links showing "heading 1","Paragraph","Bold","UI","Ol" etc. for each of the buttons

using galaxy s7+,  android 8,  mojo 2.7,  .net 4.6, sql server v12,  android chrome v72.0.3626.121

 

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13997~-1#post56131 rraghunath https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 18 Mar 2019 17:26:34 GMT
Janrain sign-in not working for Microsoft accounts? I just tried using this facility on this site, and it didn't work in Edge or Chrome. The popup window appeared as normal, but then vanished and I was not signed in.  Maybe you can see something in the logs?

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13991~-1#post56119 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 27 Feb 2019 21:29:03 GMT
Re: Better Image Gallery Thanks, Joe! That was it. :)

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13981~-1#post56104 Becki https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 26 Feb 2019 21:55:00 GMT
Re: Better Image Gallery Hi Becky,

We've figured out what is going on here. 

Once upon a time mojoPortal defaulted to allow admins to use the full directory structure under the "Data\Sites\[n]" folder of an install. A while back this was changed to default where admins had to use the "data\sites\[n]\media" folder. There is a user.config setting to control whether or not admins can use the data folder. It is named "ForceAdminsToUseMediaFolder". 

Our BetterImageGallery module doesn't take that setting into account. We're fixing it for the next version.

If you have access to the command line of the server your site is on, you can use the "mklink" command to create a symbolic link that will fix the problem. To do this, open command prompt as an administrator, change directory to "<path of your site>\data\sites\[n]\media" and then enter mklink /d BetterImageGallery ..\BetterImageGallery. This will create a directory link at "\data\sites\[n]\media\BetterImageGallery" pointing to "\data\sites\[n]\BetterImageGallery". mojoPortal and IIS won't be any the wiser.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13981~-1#post56103 Becki https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 26 Feb 2019 20:31:46 GMT
Re: Better Image Gallery Hi Joe!

Only live entry I see for authorizations is the one from the default installation with the enterSharedScope entry.

The pictures that are in the slideshow / html content feature instance all display okay when you aren't logged in. It's just the pictures for this particular plugin.

The old Image Gallery feature instance seems to work ok too.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13981~-1#post56098 Becki https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 24 Feb 2019 23:54:32 GMT
Error when send a new post in Blog Hi Joe

Windows server 2016

Database MSSQL 2016

Mojo 2.7.0.0

When i want to post a new article, page url don't generate automatic. After click on post button show below error. I write an url manually but error is available.

[IOException: The file or directory is corrupted and unreadable. ]
ystem.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) +12856632 System.IO.FileSystemEnumerableIterator`1.CommonInit() +375 System.IO.FileSystemEnumerableIterator`1..ctor(String path, String originalUserPath, String searchPattern, SearchOption searchOption, SearchResultHandler`1 resultHandler, Boolean checkHost) +371 System.IO.DirectoryInfo.InternalGetFiles(String searchPattern, SearchOption searchOption) +65 System.IO.DirectoryInfo.GetFiles(String searchPattern) +19 mojoPortal.Web.WebPageInfo.AddPhysicalPages(Collection`1 physicalPages, DirectoryInfo directoryInfo, String fileExtensionPattern) +23 mojoPortal.Web.WebPageInfo.PopulatePagesCollection(HttpContext httpContext, Collection`1 webPages, String fileExtensionPattern) +565 mojoPortal.Web.WebPageInfo.LoadPhysicalPages(String fileExtensionPattern) +123 mojoPortal.Web.WebPageInfo.GetPhysicalPages(String fileExtensionPattern) +167 mojoPortal.Web.WebPageInfo.IsPhysicalWebPage(String url) +42 mojoPortal.Web.BlogUI.BlogEdit.Save() +4556 mojoPortal.Web.BlogUI.BlogEdit.btnUpdate_Click(Object sender, EventArgs e) +62 System.Web.UI.WebControls.Button.OnClick(EventArgs e) +9782350 System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +204 System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +12 System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +15 System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +9883894 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1639

 

 

thank

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13987~-1#post56097 Sadegh Samarian https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 24 Feb 2019 09:05:02 GMT
Re: Better Image Gallery Hi Becki,

Do you have any "authorization" settings set in your web.config? There's no reason, other than that, for the photos to show up when logged in vs not logged in?

What you would be looking for in your web.config is <authorization>...

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13981~-1#post56096 Becki https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 22 Feb 2019 23:06:17 GMT
Better Image Gallery Hi -

I recently added an instance of the Better Image Gallery to a website page in order to try it out. Really liking it but ran into a problem and wondering if anyone knows the fix or things to look at, etc.

It works just fine while I'm logged into the website and all of the pictures show up as they should. If I'm logged out however, it shows this message:

Selected gallery folder was not found.

Just in case it had to do with the subfolder, I tried removing the special subfolder from the folder settings so it would use the main BetterImageGallery folder, then I put all of the pictures into that folder. The pictures then showed up fine if I was logged in but when I'm not logged in, no pictures.

Any ideas?

Thanks!

(p.s. Sorry, I think I may have posted this in the wrong forum the first time, moving it here instead.)

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13981~-1#post56086 Becki https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 18 Feb 2019 02:49:39 GMT
Member List Paging Screenshot

The MemberList.aspx pager lists pages that are empty. I am guessing that the page count is determined based on all member profiles including Locked Out Users and Users Waiting for Approval, even when these two categories are not displayed in the list.

What operating system were you running when the bug appeared? Windows Server 2019 Standard

What database platform is your site using? SQL Server 2016 Enterprise (13.0.4522.0)

What version of mojoPortal are you running? 2.7.0.0

What version of .NET do you use? 4.7.03190

What steps are necessary to reproduce the issue? Compare expected results vs actual results. Create 50 - or an appropriate number of your choosing for your test case - members. Lock out 10 - or ... see previous annotation - members. Do not approve 5 - or ... see previous annotation - members. Set MemberListPageSize to 12 - or ... see previous annotation. Go to /MemberList.aspx and view pages 3, 4, and 5.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13980~-1#post56083 TTI https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 14 Feb 2019 07:43:25 GMT
Editing in forms crashes on second save in Edge Apologies if this is a duplicate, I thought I'd logged it before but now cannot see it.

On any mojo form like /Admin/ManageUsers.aspx?userid=n
in Edge

Make a change and save > OK > make another change and save > crash.

This is log:

2019-02-04 14:20:12,305 ERROR 82.69.xx.xxx - en-GB - /Admin/SiteSettings.aspx - mojoPortal.Web.Global -  Referrer(none) useragent Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/64.0.3282.140 Safari/537.36 Edge/17.17134
System.NullReferenceException: Object reference not set to an instance of an object.
   at mojoPortal.Web.SiteUtils.IsFishyPost(HttpRequest request)
   at mojoPortal.Web.AdminUI.SiteSettingsPage.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at mojoPortal.Web.mojoBasePage.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

The cause seems to be that the referrer is empty on the second update.

Interim solution: add this to user.config...

 <add key="CheckFishyReferer" value="false"/>

But is this a security risk? If so, I hope the check can be modified to detect this scenario and save successfully anyway.

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13978~-1#post56081 CrispinF https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 13 Feb 2019 09:54:18 GMT
Re: HTML validation error with text/ Hi Karl,

Thanks for bringing this up. We'll look at removing the type param from the script references in mojoPortal. 

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13964~-1#post56076 Karl Harrison https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 08 Feb 2019 18:27:25 GMT
HTML validation error with text/javascript Hi,

I like to have my websites to pass HTML validation and I am stuck with something which I don't think I can edit on the master layout or within the mojoportal site files. 

Every javascript instance on the page gets a HTML warning"

The type attribute is unnecessary for JavaScript resources.

From line 74, column 1; to line 74, column 87

<script src="https://www.mojoportal.com//ajax.aspnetcdn.com/ajax/4.5/6/WebFormsBundle.js" type="text/javascript">

This can be easily seen on the mojoportal's own home page when that is validated. c.f. 

https://validator.w3.org/nu/?doc=https%3A%2F%2Fwww.mojoportal.com

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13964~-1#post56057 Karl Harrison https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 04 Feb 2019 13:53:10 GMT
Feed manager error on a blog Data at the root level is invalid. Line 1, position 1 I'm seeing the same error as was reported here https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=12986~1 but on a different blog.

2019-01-22 08:52:19,131 ERROR 82.69.43.209 - en-GB - /FeedManager/FeedEdit.aspx?mid=583&pageid=273 - mojoPortal.Web.FeedUI.FeedCache - There was a problem trying to read the feed for url https://mysite.co.uk/Blog/RSS.aspx?p=200~180~-1&g=20ae54ae-f501-48eb-a1f9-c4b700a8bcf1.  Ignoring.
System.Xml.XmlException: Data at the root level is invalid. Line 1, position 1.

...

The feed URL works fine accessed directly in a browser, and loads XML that is superficially identical to the XML from another feed that loads fine in the Feed Manager. I've tried removing the feed, clearing cache, adding again (to the Feed Manager) - no change.

Any ideas?

 

 

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13960~-1#post56048 CrispinF https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 22 Jan 2019 09:43:41 GMT
Blog - Expired Posts option generates error Hello

I am having a problem with expired blog posts on a 2.6 MSSQL site that I can also reproduce on the 2.7 demo site.

If a new post is setup and its end date is set to a datetime so the post has expired, then when the Blog Administration > Expired Posts option is used, an error is thrown.  This option works as expected in a pre-2.6 MSSQL installation.

On my internal 2.6 system the exception details are:

2018-11-09 13:22:38,339 ERROR  - en-GB - /Blog/ClosedPosts.aspx?pageid=53&mid=1213 - mojoPortal.Web.Global -  Referrer(http://owcmojo/Blog/Manage.aspx?pageid=53&mid=1213) useragent Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 10.0; WOW64; Trident/7.0; .NET4.0C; .NET4.0E; .NET CLR 2.0.50727; .NET CLR 3.0.30729; .NET CLR 3.5.30729)
System.IndexOutOfRangeException: IncludeImageInPost
   at System.Data.ProviderBase.FieldNameLookup.GetOrdinal(String fieldName)
   at System.Data.SqlClient.SqlDataReader.GetOrdinal(String name)
   at System.Data.SqlClient.SqlDataReader.get_Item(String name)
   at mojoPortal.Business.Blog.GetClosedDataSet(Int32 moduleId, Int32 pageNumber, Int32 pageSize, Int32& totalPages)
   at mojoPortal.Web.BlogUI.ClosedPostsPage.BindList()
   at mojoPortal.Web.BlogUI.ClosedPostsPage.Page_Load(Object sender, EventArgs e)
   at System.Web.UI.Control.OnLoad(EventArgs e)
   at mojoPortal.Web.mojoBasePage.OnLoad(EventArgs e)
   at System.Web.UI.Control.LoadRecursive()
   at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)

The same exception is thrown on the operational version of this site.

Am I missing something to prevent this happening or is there an underlying problem?

Many thanks

Neil

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13903~-1#post55956 Neil Smith https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 09 Nov 2018 14:42:55 GMT
File Manager - Upload Files mojoPortal Version2.6.0.0 MSSQL

Operating SystemMicrosoft Windows NT 6.3.9600.0

ASP.NET Info4.0.30319.42000 Running in Full Trust

 

Hello,

I am looking for some guidance on troubleshooting an issue I have run into with the File Manager. Anytime I try to upload a file or create a new folder it gives an error: "An error occurred uploading files". Checking the system log doesn't reference the error. viewing the page in a development console gives the following JS errors:

glyphicons-halflings-regular.woff2:1 Failed to load resource: the server responded with a status of 404 (Not Found)
/fileservice?t=4730d313-b9d4-4836-a59c-51cd0ee90673:1 Failed to load resource: the server responded with a status of 500 (Internal Server Error)
angular.min.js:99 POST http://mywebsite/fileservice/fileupload?t=4730d313-b9d4-4836-a59c-51cd0ee90673 500 (Internal Server Error)
(anonymous) @ angular.min.js:99
r @ angular.min.js:95
g @ angular.min.js:93
(anonymous) @ angular.min.js:126
$eval @ angular.min.js:141
$digest @ angular.min.js:138
$apply @ angular.min.js:141
(anonymous) @ angular.min.js:265
dispatch @ jquery.min.js:3
r.handle @ jquery.min.js:3
 

Is there a way I can find out more information about the error or is this something someone else has run into and has some ideas on? 

 

Thank you.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13898~-1#post55945 cirel921 https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 31 Oct 2018 13:55:46 GMT
Re: Shared Files not showing Modified Date Thanks Joe - that was indeed the issue. I wasn't aware of that setting in theme.skin.  It does seem undesirable to have settings in the UI that cannot work.  

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13894~-1#post55936 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 22 Oct 2018 20:36:00 GMT
Re: Shared Files not showing Modified Date Hi Crispin,

Check to see if your theme.skin has HideModified set to true on the SharedFilesDisplaySettings control. If so, either remove the line or set it false.

Unfortunately, there are a few settings in the various "Display Settings" controls which override the settings on the module level. We're brainstorming ways to make this more clear.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13894~-1#post55935 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 22 Oct 2018 19:59:37 GMT
Shared Files not showing Modified Date I noticed this in v2.6 and hoped it would be fixed in 2.7... seems not. I should have reported it!

Switch on "Show Modified Date?" in an instance of "Shared Files", and the date doesn't show.

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13894~-1#post55934 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sun, 21 Oct 2018 21:55:37 GMT
Re: Unable to upload files for sharing? Hi,

What version of mojoPortal are you running? I assume you are an admin on the site so it is odd that you would get the error about not having edit permission. 

The error about the 404notfound.aspx file not being found can be remedied by finding the "404notfound.aspx" string in the web.config and replacing it with "PageNotFound.aspx". This error doesn't really have anything to do with the problem you're having but it would good to fix so it doesn't clutter the log.

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13890~-1#post55914 Jerry Jones https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 27 Sep 2018 14:29:44 GMT
Unable to upload files for sharing? I am trying to create a simple file share to add to a page and every time I try to upload a file using the "Choose Files" button I get an error and the file just will not upload. Here is the log report I get for both this and trying to upload images for an image gallery:

2018-09-25 20:13:22,473 INFO (null) - (null) - (null) - mojoPortal.Web.UI.BaseContentUploadHandler - User has no edit permission so returning 404
2018-09-25 20:13:22,489 ERROR 50.96.158.45 - en-US - /SharedFiles/upload.ashx?pageid=-1&mid=4 - mojoPortal.Web.PageNotFoundHttpModule - Referrer(http://spiderone-001-site3.itempurl.com/Admin/ContentManagerPreview.aspx?mid=4)  PageNotFoundHttpModule handled error.
System.Web.HttpException (0x80004005): The file '/404notfound.aspx' does not exist.
   at System.Web.UI.Util.CheckVirtualFileExists(VirtualPath virtualPath)
   at System.Web.Compilation.BuildManager.GetVPathBuildResultInternal(VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
   at System.Web.Compilation.BuildManager.GetVPathBuildResultWithNoAssert(HttpContext context, VirtualPath virtualPath, Boolean noBuild, Boolean allowCrossApp, Boolean allowBuildInPrecompile, Boolean throwIfNotFound, Boolean ensureIsUpToDate)
   at System.Web.Compilation.BuildManager.GetVirtualPathObjectFactory(VirtualPath virtualPath, HttpContext context, Boolean allowCrossApp, Boolean throwIfNotFound)
   at System.Web.Compilation.BuildManager.CreateInstanceFromVirtualPath(VirtualPath virtualPath, Type requiredBaseType, HttpContext context, Boolean allowCrossApp)
   at System.Web.UI.PageHandlerFactory.GetHandlerHelper(HttpContext context, String requestType, VirtualPath virtualPath, String physicalPath)
   at System.Web.UI.PageHandlerFactory.GetHandler(HttpContext context, String requestType, String virtualPath, String path)
   at System.Web.HttpApplication.MaterializeHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
   at System.Web.HttpApplication.ExecuteStepImpl(IExecutionStep step)
   at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously)

Help please?

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13890~-1#post55913 Jerry Jones https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 26 Sep 2018 03:19:23 GMT
Re: Google Map not loading Thanks for the replies, and I'm happy to get by with iframes for now. I regularly use it within the Event Calendar Pro, and so I have to add the iframe to the html of the event description. A less techie solution will be great when you get onto it, thanks!

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13881~-1#post55898 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sat, 01 Sep 2018 20:02:47 GMT
Re: Google Map not loading Our webmaster used the iframe workaround. Here's an example of the code to use in an HTML instance:

<div class="mapouter">
    <div class="gmap_canvas">
        <iframe frameborder="0" height="500" scrolling="no" src="https://maps.google.com/maps?q=1600%20Pennsylvania%20Ave%20Washington%2C%20DC%2020500&amp;t=&amp;z=13&amp;ie=UTF8&amp;iwloc=&amp;output=embed" width="500"></iframe>
    </div>
</div>

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13881~-1#post55897 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 29 Aug 2018 15:24:49 GMT
Re: Google Map not loading Google has deprecated the use of Google Maps without the user supplying an API key through an account that has a payment method attached.

In June 2016 we announced that we would stop supporting keyless usage, meaning any request that doesn’t include an API key or Client ID. This went into effect on June 11 2018, and keyless access is no longer supported.

As of June 11, 2018, you must enable billing with a credit card and have a valid API key for all of your projects. This will give you the ability to scale easily with less downtime and fewer performance issues.

Google Maps User Guide

As such, the version 3 API no longer works.

Microsoft is going the same route with Bing Maps, they have shut down version 6.3 of the API and now only support version 8 that requires an API with an attached payment method.

To fix the issue the modules will need to be drastically changed to support the new APIs, or a new module that uses both new APIs will need to be created, and the user will be required to sign up for a development keys for their respective services.

Addressing this is not currently in our plans, but we'll talk about it and get back with you once we decide on a solution.

Until then, Google, Bing, and MapQuest embed codes do work in the HTML module, which isn't a fix, but I want it mentioned here for anyone that just needs to get by.

Thanks,
Elijah

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13881~-1#post55896 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 28 Aug 2018 23:02:21 GMT
Google Map not loading The Google Map feature is now not loading at all, since a few days ago. You can see this on your demo site at https://demo.mojoportal.com/map 

We see "This page can't load Google Maps correctly."

Could you advise when an upgrade is coming to fix this?

Thanks!

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13881~-1#post55895 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Sat, 25 Aug 2018 21:53:02 GMT
Form Wizard Pro - Pagination Font Awesome icons not appearing The forms wizard 'Browse Submissions' pagination icons are not appearing.

Steps to reproduce

  1. Go to https://demo.mojoportal.com/form-wizard
  2. Submit 2 forms
  3. Login as the admin user, and go to the form wizard administration -> Submission Data -> Browse Submissions
  4. You will see the first submission with a pagination at the top.  The 'Next Page' and 'Last Page' icons have not loaded.

It appears the 'View Submissions Grid' and 'Browse Submissions' load in an pop-up iFrame and font awesome font is not loaded.

 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13879~-1#post55892 hefin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 20 Aug 2018 11:05:31 GMT
Re: Should a Draft page be accessible? Hi Crispin,

This is by design. Basically, the draft option is just a shortcut so one doesn't have to uncheck all of the other checkboxes for "hiding" a page. It wasn't meant to secure the page, just hide it from people who don't have the link.

I'm sure there is a less ambiguous term for this functionality. We'll give it some thought.

As a side note, we're working on a lot of changes to the Page Settings page to make things easier to understand and find. If you think of a better name for this option, let me know. 

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13873~-1#post55879 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Fri, 27 Jul 2018 21:46:42 GMT
Should a Draft page be accessible? More of a question than a bug report - it may or may not be regarded as a bug!

Make a page Draft removes it from the menu, as the help link says ("You can mark a new page as a draft if it has only draft content on it. This will make it only appear in the menu for users in the Draft Edit Roles and roles that can approve the content."). It also hides it from the sitemap.

But I was surprised to find that the page is still accessible by URL, according to the page security applied. Is this by design? I was expecting to get a "page not found"/404 unless in the Draft Edit Roles or roles that can approve the content. 

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13873~-1#post55877 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 26 Jul 2018 12:32:29 GMT
Re: Drag and drop pages in Page Manager gets it wrong More info... the "invalid request" message appeared when using the Page Manager as an unauthenticated user!  I was rather surprised to be able to access this page, but perhaps it has to be that way(?) and certainly I couldn't actually change anything, even though it looked like I would be able to.

Trying again on one site with an old artisteer-derived skin, in Chrome logged in as administrator, on loading the page I get a "JQMIGRATE: jQuery.browser is deprecated" warning.

On dragging/moving the page I see this 404 error: https://mysite.com/Data/style/img/jqtree-circle.png

Immediately after clicking OK to the confirmation prompt, I see this: "[Deprecation] Synchronous XMLHttpRequest on the main thread is deprecated because of its detrimental effects to the end user's experience. For more help, check https://xhr.spec.whatwg.org/."

Then this "jquery.min.js:5 XHR finished loading: POST "https://mysite.com/Services/SiteMapJson.ashx?cmd=move""

The page appears to have moved in the hierarchy, but on loading the page, the order shown in the tree is usually not the same as the actual page order, and I have to keep messing around for ages until by luck they end up correct. It's really very irritating as there's no other way of re-ordering the pages (without going into the database) - or is there? Is it possible to revert to the old page manager?

The pages I've just been testing on are the children of this page: https://www.breconfans.org.uk/fan-y-big-horseshoe-race and you'll see the order matters as they are for years. New pages appear at the bottom by default so have to be moved.

Any help on this would be appreciated, and I'll test with a framework skin soon.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13866~-1#post55872 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Tue, 17 Jul 2018 07:00:12 GMT
Re: Drag and drop pages in Page Manager gets it wrong Do you have any script errors when using the page manager? 

Do you have the same problems when using the "framework" skin?

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13866~-1#post55870 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 16 Jul 2018 23:24:26 GMT
Re: Drag and drop pages in Page Manager gets it wrong I've now found that in FF and Chrome, dragging and dropping the page results in a popup "Invalid Request" warning immediately after the "Are you sure you want to move the page?" dialogue.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13866~-1#post55867 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Mon, 16 Jul 2018 22:53:43 GMT
Drag and drop pages in Page Manager gets it wrong In three different sites I find the Page Manager drag and drop experience infuriating - move a page to a new place (typically beneath the same parent, just re-ordering siblings) > the page manager shows the new order respecting where I dragged the page to > exit the Page Manager and the pages are in a different order. It has just taken me about ten minutes to get my page order right after moving one page. I cannot yet identify any logic to the problem, but will report back if I do.

mojoPortal Version 2.6.0.0 MSSQL

Operating System Microsoft Windows NT 6.1.7601 Service Pack 1

ASP.NET Info 4.0.30319.42000 Running in Full Trust

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13866~-1#post55862 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Thu, 12 Jul 2018 06:59:30 GMT
Re: Forum notifications sent to locked out users Hi Crispin,

I don't know that it's as intended but it is as written. I don't see any code that accounts for whether or not a user is locked out or not. I'm not sure if that's desirable in all situations either. For example, if I get locked out of my bank website, I don't want them to quit sending me notices. Same goes for some of my social media accounts. But, I can understand that this is something that would be beneficial in other scenarios.

I'll add this to our request list. I think it might be best to implement a new option (i.e., Silence Notifications) that we can check before emailing anything to any user. Then, we can have a site setting for whether or not the Silence Notifications option is enabled when a user is locked out.

Thoughts?

Thanks,
Joe

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13855~-1#post55844 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 20 Jun 2018 23:07:16 GMT
Forum notifications sent to locked out users I has assumed that locked out users would receive no further comms from a site, but it turns out if they are subscribed to a forum they still get sent notifications. Is this as intended? I've not tested behaviour for Newsletters.

]]>
https://www.mojoportal.com/Forums/Thread.aspx?pageid=5&t=13855~-1#post55835 Crispin https://www.mojoportal.com/Forums/Thread.aspx?pageid= Wed, 13 Jun 2018 22:00:25 GMT